EPSON Stylus COLOR C70/C80
5.2.11 Protection Counter Clear (and Check)
This section describes how to clear the protection counter. This operation must be done
under the following conditions.
1.
When replacing waste ink drain pad.
2.
When user carries on the unit that has been occurred the maintenance
error.
3.
Refurbishment
1.
Replace to new waste ink drain pad by referring Chap 4 "Disassembly & Re-
assembly".
2.
Setup the adjustment program. Main screen (Figure 5-2) appears.
(Refer to Section 5.2.1.)
3.
Select "Maintenance" and then "protection counter".
4.
Main screen changes as below.
Figure 5-50. Protection Counter Operation Initial Screen
Adjustment
5.
Select "Clearing the protection counter", and press "O.K." button on the program
screen.
Figure 5-51. Protection Counter Clearing Screen
6.
Press "O.K." button on the program screen.
7.
Following screen appears.
Figure 5-52. Protection Counter Clear Completion Screen
Adjustment
Revision A
163