Upper Case Removal - Epson Stylus Color C70 Service Manual

EPSON Stylus COLOR C70/C80

4.2.1.3 Upper Case Removal

1. Remove the Printer Cover. (Refer to Section 4.2.1.1)
2. Remove the Stacker Assembly. (Refer to Section 4.2.1.2.)
3. Remove the three screws (1) (CBP 3x10 {6±1 kgf.cm}) that are securing the Upper Case.
Figure 4-4. Screws Securing the Upper Case
4. Use tweezers or a flat-tipped screwdriver to disengage the front four Hooks of the
six Hooks that are securing the Upper Case, and also the Hook near the PG Lever
at the left side of the printer. Then lift up the right side of the Upper Cover while
pivoting it on its left side, and remove it from the printer.
Be careful not to break the Hook holes.
Disassembly and Assembly
C.B.P 3x10
Upper Case
6 Hooks
1
Figure 4-5. Hooks Securing the Upper Case
Disassembly
Revision A
3
2
4
5
103