Epson Stylus Color C70 Service Manual page 167

EPSON Stylus COLOR C70/C80
st
4. Select "Printing 1 dot position", and press "O.K." button on the program screen.
st
Printer starts printing a 1 dot position printing. Following screen appears during
printing.
st
Figure 5-61. 1 Dot Position Printing Screen
5. Following is the printed pattern. And check your expected direction either right or
left.
First dot position
+1.0583 mm
Figure 5-62. 1
6. Select "Adjust" and press "O.K." button on the program screen.
Adjustment
st
Dot printing Pattern
7. Following screen appears.
Figure 5-63. 1
8. Using right/left key, select out your expected value, then press "Write" button on
the program screen.
9. Program screen changes as below.
Figure 5-64. Input Value Acceptance Screen
Adjustment
st
Dot Position Adjustment Screen
Revision A
167