Epson Stylus Color C70 Service Manual page 133

EPSON Stylus COLOR C70/C80
Nail
Paper Back Lever Cam
Figure 4-76. Reassembly (1)
4. Move the Support Paper Back Lever to the specified position.
5. Set both a "Silence Lever Support" and "Silence Lever" with its Extension Spring.
When setting the Silence Lever Support in place, hook the end of
the Torsion Bar Hopper onto the projection on the Silence Lever
Support. Furthermore, if you would like the parts to remain in this
condition even when they are let go, you can manually change the
relative positions of the Silence Lever and Silence Cam to achieve
this.
Disassembly and Assembly
Spur Gear 28.8
6.
7.
Disassembly
Hook
Nail
Figure 4-77. Reassembly (2)
Insert a nail into the hole at the top of the Silence Cam, and then while inserting
the end of the nail into the hole in the arc of the Spur Gear 28.8, move the Silence
Cam to the specified position.
Spur Gear 28.8
Nail
Figure 4-78. Reassembly (3)
Remove the two nails, and then check that the two alignment holes are exactly
aligned.
Revision A
Silence Lever
Support
Torsion Bar
Hopper
Silence Lever
Silence Cam
133