Waste Ink Pad Removal; Asf Unit Removal - Epson Stylus Color C70 Service Manual

EPSON Stylus COLOR C70/C80

4.2.1.7 Waste Ink Pad Removal

1. Remove the Printer Mechanism. (Refer to Section 4.2.1.6)
2. Remove the two Waste Ink Pad from Lower Case.
Lower Case
Figure 4-16. Waste Ink Pad Removal
Disassembly and Assembly
Waste Ink Pad

4.2.2 ASF Unit Removal

1. Remove the Printer Mechanism. (Refer to Sections 4.2.1.6.)
2. Remove the two screws (4) (CBS 3x8 {8±1 kgf.cm}) that are securing the ASF
Unit.
C.B.S 3x8
ASF Unit
[Right-Rear side]
Figure 4-17. Screws Securing the ASF Unit
3. Remove the screw (2) (CBS 3x6 {8±1 kgf.cm}) that is securing the LD Roller
Cover, and then slide the LD Roller Cover to the left.
Figure 4-18. Screw Securing the LD Roller Cover
4. Disengage the Hook, and then turn the ASF Mounting Plate to the right to remove
it.
Disassembly
C.B.S 3x8
LD Roller Cover
C.B.S 3x6
Center of Printer Mechanism
Revision A
[Left-Rear side]
108