Epson Stylus Color C70 Service Manual page 112

EPSON Stylus COLOR C70/C80
C.B.(0) 4x5
Figure 4-27. Screws Securing the AC Inlet Mounting Plate
4. Remove the five screws (2) (CBS 3x6 {6±1 kgf.cm}) that are securing the Power
Supply Board Assembly.
C.B.S 3x6
4
3
Figure 4-28. Screws Securing the Power Supply Board
5. Remove the AC Inlet Mounting Plate and then the Power Supply Board Assembly
in that order.
Disassembly and Assembly
1
C.B.S 3x6
2
AC Inlet Mounting Plate
1
2
5
When installing the power supply board assembly and the AC
inlet mounting plate, the screws should be installed in the order
shown in the illustration. (Figure 4-27, 4-28)
When installing the Cable Cover, it should be installed so that the
side with the notches is facing upward.
Figure 4-29. Cable Cover Installation
When installing the P/S Lower Plate Unit, the screws should be
installed in the order shown in the illustration. (Figure 4-26)
Disassembly
Revision A
Cutting Part
Cable Cover
112