Upper Case Removal - Epson Stylus COLOR 300 Service Manual

3.1 OVERVIEW
This section describes procedures for disassembling and assembling the main components
of EPSON Stylus Color 300. Since the most of components are the same with EPSON
Stylus Color 200/Stylus 200, this manual only describes procedures unique to this printer.

3.1.1 Upper Case Removal

1. Remove the sheet guide from the printer.
2. Move the paper select lever to the backward position, then remove one screw
(CBP/M2x6) securing a knob to the paper select lever.
3. Open the printer cover, then remove five screws (one CBB/M4x6 and four CBP/M4x12)
securing the upper case to the bottom case.
4. Remove the upper case by lifting it upward.
CBP (M4x12)
Rev. A
CBP (M2x8)
Upper Case
Figure 3-1. Upper Case Removal
Chapter 3 Disassembly and Assembly
Knob
(paper select lever)
CBB (M3x8)
Printer Cover
3-1