Table of Contents
Advertisement
2. Listening to the sound of a combina-
tion
1 Press the [COMBI] key. (LED lit)
You will enter Combination mode. Make sure that
the upper line of the LCD screen indicates "COMBI
1.1: Play."
Selecting a combination number
2 Make sure that "Combi Select" is selected.
If it is not selected, use the [
to highlight the combination name in "Combi
Select."
"Combi Select"
Bank No.
3 Use the VALUE controllers to select the combina-
tion that you wish to play.
"1. Listening to the sound of a program" 3
4 Audition the sound.
Play a note on the connected MIDI instrument to
hear the sound you selected.
Selecting a combination bank
In Combination mode, you can select and play combi-
nations from banks INT-A–INT-E and EXB-A–EXB-H.
( Table below)
5 Press the [BANK] key to select either INT banks or
EXB banks.
INT ([INT/EXB] LED dark): Pressing the [A]–[E]
keys will select banks INT-A–INT-E.
EXB ([INT/EXB] LED lit): Pressing the [A]–[H] keys
will select banks EXB-A–EXB-H.
6 Press one of the [A]–[H] keys to select a bank.
By changing banks you can select combinations
from another bank.
With the factory settings, the INT-A–INT-D banks
contain combinations.
The selected bank number is shown in the left of the
LCD screen. For example if you wish to select bank
INT-B, press the [BANK] key to make the [INT/
EXB] LED go dark, and then press the [B] key. (The
upper left of the LCD screen will indicate Bank
INT-B.)
When bank INT is selected, the [F]–[H] keys can-
not be used.
Bank
Prog. No. Explanation
INT-A...INT-D (I-A...I-D)
000...127
INT-E (I-E)
000...127
EXB-A...EXB-H (E-A...E-H) 000...127
], [
], [
], [
] keys
"Category"
Preloaded combinations
( VNL)
User combinations, EXB-
MOSS combinations
User combinations, EXB-
PCM series combinations
Other ways to select programs or combinations
Selecting by category
Programs or combinations can be selected from sixteen
categories.
With the factory settings, these are organized by instru-
ment, such as keyboard, organ, bass, and drums.
( PG p.2 "Cat.HOLD," "Select by Category")
Selecting with the 10's Hold function
You can fix the 10's place of the program number or
combination number, so that pressing a numeric key
once will change only the one's place of the program
number and select it accordingly. ( PG p.2 "10's
HOLD")
Selecting from an external MIDI device
The TRITON-Rack can receive MIDI program change
messages from an external MIDI device to select pro-
grams. ( PG p.221)
3. Using controllers to modify the
sound
The TRITON-Rack provides numerous controllers that
allow you to control the tone, pitch, volume, effects,
and arpeggiator etc. in realtime while you play.
REALTIME CONTROLS [1], [2], [3], [4]
These knobs can be used to control the filter cutoff fre-
quency and resonance, the amp and filter EG, volume,
portamento time, pan, pitch LFO, or the send levels to
the master effects, etc.
1 Press the [SELECT] key to switch the function of
the realtime controllers to A-mode, B-mode or C-
mode.
Each time you press the key, A-mode, B-mode or C-
mode will be selected alternately, and the corre-
sponding LED will light.
The selected mode will light.
2 Rotate the desired knob to control the sound, etc.
A-mode controls
In A-mode, knobs [1]–[4] will control/edit the follow-
ing functions.
Placing the knobs in the center (12 o'clock) position
will produce the values specified by the program
parameters.
Knob [1]: LPF CUTOFF
Adjusts the cutoff frequency of the low pass filter.
19
Advertisement
Table of Contents
