Table of Contents
Advertisement
Saving on external media
For details on the data that can be saved on external
media (floppy disk etc.) ( p.36 "Types of data that can
be saved").
The user patterns or RPPR settings of Multi mode
and the multisamples and samples of Sampling
mode cannot be written into internal memory. This
data will disappear when the power is turned off.
If you wish to keep this data, you must save it on a
floppy disk or on other external SCSI storage
media (if the separately sold EXB-SCSI option is
installed).
Other types of data can also be saved on a floppy
disk, or (if the separately sold EXB-SCSI option is
installed) on external SCSI storage media (maxi-
mum 4 GB), and loaded to restore the original set-
tings even if they have been modified. It is a good
idea to save favorite settings that you create.
As an example, we will explain how to save the
following data.
• Internal memory programs, combinations, global
settings, user drum kits, user arpeggio patterns
• Multi, user patterns
• Multisamples and samples created in Sampling
mode
Multiple floppy disks may be required to save all
requested data.
1 If you wish to save the data on a floppy disk, insert
a floppy disk into the TRITON-Rack's floppy disk
drive.
For details on floppy disk handling, be sure to refer
to "Cautions when handling floppy disks" ( p.84).
If the separately sold EXB-SCSI option is installed
and you wish to save the data on a hard disk or
other external SCSI media, refer to the EXB-SCSI
owner's manual, and make sure that the external
SCSI drive etc. is connected correctly.
Format the disk if necessary ( PG p.137)
2 Press the [DISK] key. You will enter Disk mode.
Drive Select
3 Press the [F2] ("Save") key to access the Save page.
4 When saving to external SCSI media, choose Drive
Select, and specify the save destination drive.
5 If the media contains directories, select the direc-
tory in which you wish to save the data.
To move to a lower directory level, press the [F6]
("OPEN") key. To move to a higher level, press the
[F5] ("UP") key.
40
6 Select the "Save All" utility.
Press the [F8] ("UTILITY") key to access the utility
menu. Press the [F7] key to select "Save All," and
then press the [F8] ("OK") key.
A dialog box will appear. The contents of the dialog
box and the settings etc. will differ depending on the
type of data that you are saving. For details on each
type of file ( PG p.133).
7 Press the [F5] ("Name") key to access the text dia-
log box, and input the name.
8 Press the [F6] ("S.Item") key, and un-check the
items that you do not need to save.
Select item
Use "Select Item" to select Prog Bank, Combi Bank,
Drum Kit, or Arpeggio Pattern, and select the items
(banks) that you wish to save. The items whose
check boxes are checked will be saved. After making
your selection(s), press the [F8] ("OK") key.
9 Press the [F8] ("OK") key to execute the Save oper-
ation.
If the data fits on one volume of media
The data will be saved on the specified media, and
you will return to the Save page. The amount of
time required will depend on the amount of data.
If a file with the same name already exists on the
floppy disk, you will be asked whether you want to
overwrite. If you wish to overwriting, press the [F8]
("OK") key. If you wish to save without overwriting,
press the [F7] ("Cancel") key, re-do the operation from
step 6, and rename the data in step 7 before saving it.
If the data does not fit on one volume of media
(floppy disk)
The "No space available on medium" dialog box
will appear. ( PG p.133)
You can divide the file and save the data on multiple
volumes of media. If you do not want to divide the
data, press the [F7] ("Cancel") key, and re-save the
data on media that has more free area or on a differ-
ent drive (if the separately sold EXB-SCSI option is
installed).
p.38
Advertisement
Table of Contents
