Table of Contents
Advertisement
Can't save data to a floppy disk
• Is the floppy disk inserted correctly?
• Is the floppy disk formatted?
• Is the write protect hole of the floppy disk covered,
so that it is in the "write permit" position?
Correctly insert a 3.5 inch 2HD or 2DD floppy disk
(with its write protect hole covered) into the disk
drive, and perform the save operation once again.
The TRITON-Rack does not recognize when MO
media has been exchanged, and does not cor-
rectly display the media information after the
exchange.
• If you are able to switch the mode setting of your
MO drive between DOS/V(PC/AT) and Mac
settings, please use DOS/V(PC/AT) mode. For
details on changing the mode of your drive, refer
to the owner's manual for your MO drive.
• Use the Disk mode Media Information page utility
"Scan SCSI device" to remount the SCSI device.
• If your MO drive does not have a mode setting, or
if the media exchange is not recognized even after
you switch the mode, use the drive select button to
select a different drive, and then re-select the MO
drive.
"Word Clock Error" is displayed
• Is the GLOBAL 1.1: System, Preference page
"System Clock" parameter set correctly? ( PG
p.273)
If the separately sold EXB-DI option is installed in
the TRITON-Rack, and you wish to synchronize the
digital signals with an ADAT format external device
as the master, set "System Clock" to Word Clock.
If "System Clock" is already set to Word Clock,
make sure that the external device is correctly con-
nected to the 48 kHz WORD CLOCK IN jack.
105
Advertisement
Table of Contents
