Table of Contents
Advertisement
Customizing Your Pro 215
Programmable Features
The default settings for various machine features may be changed to suit your individual needs. All
of these features remain set until this process is repeated.
Each of the programmable features, along with its program number and options are contained in the
chart below. The procedure to change the default settings follows the chart.
Note: The procedures written in this manual are based on the factory default settings.
Priority Tray: This feature allows you to set
the default paper tray. At power on or auto
clear, the copier will return to the selected
priority paper tray.
Auto Clear Time Out: This feature allows you
to select the time it takes for the copier to
return to the normal copy mode after a copy
cycle is complete.
Time Out to Power Save: When enabled,
this feature automatically reduces power used
by the copier if the copier has not been used
for the set period of time.
Time Out to Power Shut-Off: When enabled,
this feature significantly reduces power used by
the copier if the copier has not been used for
the set period of time.
Default Magnification: This feature allows
you to make copies slightly larger or smaller
than the original, or the same size.
Default Image Quality: This feature allows
you to select the default Image Quality mode.
Feature
Program
Number
0
0 – Main paper tray *
1 – Alternate paper tray
2 - Second paper tray
1
0 – Off
1 – 30 seconds
2 – 60 seconds *
3 – 90 seconds
4 – 120 seconds
2
0 – Off
1 – 45 seconds
2 – 90 seconds *
3 – 2 minutes
4 – 5 minutes
3
0 – 2 minutes
1 – 5 minutes *
2 – 15 minutes
3 – 30 minutes
4 – 60 minutes
5 – 120 minutes
6 – Off
4
0 – 100% *
1 – 99%
2 – 101%
5
0 – Auto Exposure *
1 – Text
2 – Photo
Option Number
* Factory Setting
25
Advertisement
Table of Contents
