Table of Contents
Advertisement
Installation
(continued)
Follow the steps below to properly set up your Xerox Pro 215.
1. Remove the bag from the Pro 215.
2. Remove the pieces of tape and the packing material.
Remove the tape and the packing material supporting the
clear plastic 2-sided tray.
3. To ensure the 2-sided tray is in the correct position,
gently push it in the direction shown by the arrow.
4. Open the Automatic Document Feeder (ADF) and remove
the packing materials shown.
5. Unscrew and remove the shipping screw from the left
side of the Pro 215.
CAUTION: The Pro 215 will malfunction if the shipping
screw is not removed.
6. Lift and pull open the paper tray. Turn and remove the
paper tray button.
CAUTION: Paper will misfeed if the paper tray button is not
removed.
Note: Be sure to remove the pressure plate lock from both
paper trays.
7
Advertisement
Table of Contents
