Table of Contents
Advertisement
Control Panel
1
The control panel has keys and lights that are used to control and display the conditions of the Pro
215.
1. 1-Sided/2-Sided Mode: Use the 2-Sided copy feature to make one or two-sided copies from
one or two-sided originals. Refer to the Making Copies on the Automatic Document Feeder
section for detailed information.
2. Image Quality Mode: The image quality mode is used to maximize copy quality.
Auto– for originals with a colored background or mixed text and graphics.
Text – for originals that contain mainly text.
Photo – for copying photographs.
Toner Save – decreases the overall copy density in order to extend the life of the toner
cartridge.
3. Copy Contrast: Press the contrast keys to lighten or darken copies while in the Text, Photo,
or Toner Save settings. Refer to the Image Quality section for detailed information.
4. Preset Reduction/Enlargement: Press this key to select any of the preset reductions or
enlargements.
The
(customer settable) percentage has been set at the factory for 50%. Refer to
Customizing Your Pro 215 for information about changing this percentage.
5. Percentage Indicator: The indicator will light when any reduction or enlargement setting is
selected.
6. Variable Percentage: Press the down key to decrease the percentage. Press the up key
to increase the percentage. Any percentage from 50% to 200% may be selected.
7. %: Press this key to display the reduction/enlargement percentage selected.
8. Display Window: Copy quantity, reduction/enlargement settings, and status codes appear in
this area.
9. Quantity Keys: Select up to 100 copies. Press the 1 key to increase the quantity by one.
Press the 10 key to increase the quantity by 10.
To display the number of copies requested during the copy run press the 10 key.
Press the Clear key to clear the selected quantity.
10
2
3
4 5
6
7 8
9
10
11
12 13
14
15
16
17
Advertisement
Table of Contents
