Table of Contents
Advertisement
Auto Contrast Adjustment: The copy
contrast range may be adjusted when the copy
image is consistently too light or too dark in
the Auto Image Quality mode.
Paper Trail Edge Deletion: The trail edge
deletion can be turned Off to accommodate
originals that have print to the very bottom
edge. When Off, another 4 mm will copy,
however the image quality may deteriorate as it
gets closer to the bottom edge.
When this feature is On each time the paper
tray is opened edge deletion is disabled for the
first copy. Edge deletion is enabled for the
following copies.
Automatic Document Feeder Auto Start:
When enabled, the ADF will begin to copy as
soon as paper is placed in the ADF.
Reduction/Enlargement Preset: This feature
allows you to set a specific preset reduction or
enlargement setting for the
Auto Paper Tray Switching: When enabled,
the copier will automatically switch to another
paper tray when the selected tray runs out of
paper.
Automatic Document Feeder Contrast
Adjustment: The copy exposure range may
be adjusted when the copy image is
consistently too light or too dark.
Return to Print Mode: This feature allows
you to select the time it takes for the copier to
return to the print mode after a copy job is
complete.
26
Feature
key.
Program
Number
6
0 – Lightest
1 – Lighter
2 – Normal *
3 – Darker
4 – Darkest
7
0 – On *
1 – Off
9
0 – On
1 – Off*
10
50 – 200%
Default 50% *
11
0 – On
1 – Off *
12
0 – lightest
1 – lighter
2 – Normal *
3 – darker
4 – darkest
14
0 – 60 seconds *
1 – 90 seconds
2 – 120 seconds
3 – 150 seconds
4 – 180 seconds
5 – Off - no time out
Option Number
* Factory Setting
Advertisement
Table of Contents
