Table of Contents
Advertisement
Safety Notes
Your Pro 215 and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination and approval, and compliance to established
environmental standards. Please read the following instructions carefully before operating the Pro
215 and refer to them as needed to ensure the continued safe operation of your Pro 215.
Follow all warnings and instructions marked on or supplied with the product.
Symbology:
= High Voltage,
= Heated Surface,
= Warning
= Laser Caution use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Unplug this Pro 215 from the wall outlet before cleaning. Always use materials specifically
designated for this Pro 215. Use of other materials may result in poor performance and could
create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this User Guide for proper cleaning
methods.
Never use supplies or cleaning materials for purposes other than what they were intended. Keep
all supplies and materials out of reach of children.
Do not use this Pro 215 near water, wet locations, or outdoors.
Do not place this Pro 215 on an unstable cart, stand, or table. The Pro 215 may fall, causing
personal injury or serious damage to the Pro 215.
This product is equipped with a 3-wire grounding type plug (e.g., a plug having a third grounding
pin). This plug will fit only into a grounding-type power outlet. This is a safety feature. To avoid risk
of electric shock, contact your electrician to replace the receptacle if you are unable to insert the
plug into the outlet. Never use a grounding adapter plug to connect the Pro 215 to a power source
receptacle that lacks a ground connection terminal.
1
Advertisement
Table of Contents
