Setting Up Call Forwarding - Siemens Gigaset S4 professional User Manual

Step by Step
> <
Call Forward
> < [
> < [
> <
deactivated
> <
25
> o [
Forward on no reply
The call is forwarded if you do not accept the call. You
can configure the length of time the handset will ring
until the forward is activated.
This also applies for a second call
on a call.
Forward on not reachable
The call is forwarded if the handset is outside the radio
range, switched off or is not operational because the
battery is not charged.
This forward is activated if the handset cannot be
reached for at least 12 seconds after the call.

Setting up call forwarding

u
Press the INT key.
[
Select the menu item and confirm.
„Select "Internal" for internal calls or "External" for exter-
nal calls and confirm.
„Select "Uncondition.CFU", "Busy CFB", "No Reply CFN-
Ry" or "NotReach. CFNRc" and confirm.
[
Select the menu item and confirm. The display shows
"activated".
Only if forwarding type is "No Reply CFNRy":
[
Select the specified time and confirm.
o [
Enter the time in seconds before the call should be for-
warded and confirm. A value between 5 and 30 sec-
onds is permitted. Default value: 25 seconds.
Select the next line, enter the destination phone
number for this forward and confirm.
a
Press the On-hook key to end the operation.
Making calls – enhanced functions
Page 69 if you are
55