Registration Roller A S S E M B L - Canon LBP-2000 Service Manual

3) Remove the screw [2], and detach the
multifeeder pickup solenoid [3].
Figure 3-4-23
C. Registration Roller Assembly
1 . Removing the registration roller
1) Remove the drive assembly. (See III-B-1
'Removing the Drive Assembly.')
2) Remove the screw [1], and detach the
[2]
grounding plate [2].
[3]
3) Pull off the bushing [3] on the left to the
left.
4) Remove the caw [4] on the right, and de-
tach the registration roller assembly [5].
CHAPTER 3
[2] [1]
Figure 3-4-24
[3] [5]
[4]
Figure 3-4-25
3 - 23