Canon LBP-2000 Service Manual page 29

7) Press the Go key so that the Printer starts cleaning the fixing roller.
Note: Allow about 5 min before the cleaning sheet is delivered to the delivery tray after cleaning
is started.
8) Press Go key to bring the printer on-line state.
4 . Manual feed pickup roller
If pickup faults start to occur often because of glue or lint from recycled paper, advise the user to
purchase the following for cleaning the pickup roller; if faults still occur after cleaning, the manual
feed pickup roller and the manual feed separation pad must be replaced at the same time (about
50,000 pages).
1) Obtain a manual feed tray cleaning tool and a cleaning sponge.
2) Peel the sticker from the cleaning sponge, and attach it as shown to the manual feed cleaning
tool.
3) Moisten the sponge portion of the manual feed tray cleaning tool with water.
Note: Be sure the sponge is no more than moist. If water shows when the sponge portion is
touched, shake it well to rid it of water.
Manual feed tray cleaning tool
Cleaning sponge
Figure 1-7-3
Figure 1-7-4
CHAPTER 1
1 - 23