Operation Panel Menus - Canon LBP-2000 Service Manual

B . Operation Panel Menus
You can access the following menus though the operation panel:
• SHUTDOWN MENU*3
• SECURED JOB MENU*1
• TEST MENU
• PCL MENU
• PS MENU*2
• FEEDER MENU
• CONFIG MENU
• JOB CONTRL MENU*3
• PARALLEL MENU
• USB MENU
• ETHERNET MENU*4
• LANGUAGE MENU
• RESET MENU
• JOB LOG MENU
NOTE: * 1 .If there is no secured job,this is not displayed.
* 2 .This is not displayed,when the option Adobe Postscript 3 Module is not installed.
* 3 .This is not displayed,when the option Hard Disk is not installed.
* 4 .This is not displayed,when the option print server is not installed.
Follow these steps to access the menus and make selections:
1 . Accessing and selecting menu items
1) Check the operation panel and be sure the Job indicator is OFF.
2) Press the Go key to set the printer off-line. The On Line indicator goes OFF and PAUSED is
displayed in the top line.
3) Press the Menu key to display the name of the first menu. Press the Menu key until you see the
m e n u .
4) Press the Item key to display the name of the first item on the menu. Press the Item key until
you see the item.
5) Press the Value key until you display the values you want to change.
6) If you want to change the setting, press the Value key until the value you want is displayed.
Then press the Enter key.
7) Press the Go key to set the printer on-line.
Figure 1-8-2 lists the User Menu Operation Flow.
2 . Confirming menu selections
• Here are two ways the selections made through the operation panel can be reviewed:
Scroll through the menu items to check all selections marked with an asterisk.
Make a Test Print. The printed output lists all settings that are in effect. See the Printing the
Test Print section for more information.
CHAPTER 1
1 - 27