Canon LBP-2000 Service Manual page 35

User Menu Operation Flow
Press "Go" to take the printer off-line.
READY
PAUSED Press "Menu" to display the following menu.
SHUTDOWN MENU SECURED JOB MENU
SHUTDOWN MENU A (user name)
SHUTDOWN=NO* B (job name)
If there is
NO YES no secured
job, this
C (user name)
menu is not
D (job name)
displayed.
Job in progress?
NO
E (user name)
YES
F (job name)
JOB IN PROGRESS
+CANCEL/-CONT.
SHIFT+VALUE
VALUE
(CONTINUE)
(CANCEL)
S (user name)
SAFE TO TURN OFF T (job name)
PRINTER
(message only)
NO
INVALID PASSWORD
REENTER=YES*
Incorrect
After pressing ENTER key, the
secured job is chosen and printed,
then Mercury goes back to
"READY".
CHANGE PASSWORD
NEW PASSWORD=
xxxxxxx-xxxxxxx (14 digits)
CONFIRM PASSWD=
xxxxxxx-xxxxxxx
(14 digits)
YES
INVALID PASSWORD
Verify
REENTER=YES* NO
password Incorrect
NO
Correct
PASSWORD CHANGED
(message only)
Go to CHANGE PASSWORD
automatically after few seconds displaying.
TEST MENU PCL MENU
TEST MENU PCL MENU
SHOW PAGE COUNT RESOLUTION=600*
TEST MENU PCL MENU
The followings are
TEST PRINT COPIES=1*
displayed, scrolling
a display with
VALUE including
TEST MENU PAGE SIZE=
SHIFT key.
PRINT PCL FONTS A4*
- Total counter
- Small size counter
- Large size counter
TEST MENU ORIENTATION=
PRINT PS FONTS PORTRAIT*
TEST MENU PCL MENU
PRINT PCL DEMO FORM=60 LINES*
If a job whose name TEST MENU PCL MENU
is T is chosen. PRINT PS DEMO FNTSRC=INTERNAL*
YES
ENTER PASSWORD= TEST MENU PCL MENU
xxxxxxx (7digits) PRINT JOB LOG FONTNUM=0*
YES
TEST MENU PCL MENU
PRINT EN CONFIG PT.SIZE=12.00*
Verify
password
TEST MENU PCL MENU
Correct
CONTINUOUS TEST PITCH=10.00*
T (job name)
COPIES=1* TEST MENU PCL MENU
1 to 999
CLEANING PAGE SYMSET=ROMAN8*
TEST MENU PCL MENU
CLEANING ROLLER AUTO CR=OFF*
PCL MENU
WIDE A4=OFF*
PCL MENU
OVERRIDE=OFF*
* 55 as auto print/clear log is applied to system with HDD.
Ay system with HDD, "AUTO PRINT/CLEAR LOG EVERY 55 JOBS" is displayed as default. They are as like as below.
* AUTO PRINT LOG EVERY 30/55 JOBS ... YES/NO [NO is default]
Use this option to specify whether the printer prints the job log after every 30/55
jobs. Setting the job log for automatic printing is useful if accounting for each
printed page is important at your site.
* AUTO CLEAR LOG EVERY 30/55 JOBS ... YES/NO [NO is default]
Use this option to specify whether to clear the job log after every 30/55 jobs.
If you do not enable this option, and do not clear the job log from the printer, the
printer saves a record of all jobs. (without HDD=32 jobs / with HDD=1280 jobs)
PS MENU FEEDER MENU
PS MENU FEEDER MENU MPT,
(display only) RESOLUTION=600* (display only) FEED=CASSETTE1* CASSETTE2-4
PS MENU FEEDER MENU
1 to 999 COPIES=1* 1 to 999 TRAY SWITCH=ON* OFF
A3,B4,B5,A5,
11x17,LGL,LTR, PS MENU FEEDER MENU
EXEC,COM10, PRINT ERRS=OFF* MANUAL=OFF*
ON ON
MONARCH,C5,DL
A3, A4, B4, B5, A5,
FEEDER MENU
11x17, LGL, EXEC,
LANDSCAPE MPTSIZE=LETTER* COM10, MONARCH,
C5, DL, CUSTOM
5 to 128
NOTE:
- Bold-Italic styled characters appear after an option like
PS module , NIC, Option feeder, HDD, or Flash has been installed.
SOFT, FLASH
1 to 999
Available for proportionally-spaced font
If a password has been set,
4.00 to 999.75 by 0.25
these MENUs inside line (Administrator area) are only available for an administrator.
Available for fixed-spaced font
0.44 to 99.99 by 0.01
USB MENU
ROMAN-8, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-852,
PC-8 TK, WIN L1, WIN L2, WIN L5, DESKTOP, PS TEXT, VN INTL, VN
US, MS PUBL, PERSONALITY=
MATH-8, PS MATH, VN MATH, PI FONT, LEGAL, ISO 4, ISO 6,
AUTO*
ISO 11, ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, WIN 3.0, MC TEXT,
PC-755, PC-860, PC-865, PC-8 GR, PC-1004, ISO L6, WIN BALT
ON I/O TIMEOUT=
15*
ON
NOTE: If *NO* panel key touch in TWO MINUTES,
Printer goes back to "READY" automatically.
This mechanism is applied to the administrator
area only.
ON
JOB LOG MENU RESET MENU
AUTO PRINT LOG
PER 30 JOBS=NO*
YES
AUTO CLEAR LOG
PER 30 JOBS= NO* YES
AUTO PRINT LOG
PER 55 JOBS= NO*
YES
JOB LOG FULL=
STOP*
WARNING
AUTO CLEAR LOG
PER 55 JOBS=NO*
YES
GMT DIFFERENTIAL -12.0 to +12.0 by 0.5
TIME=+00.0*
* For a model WITHOUT HDD, RAM based model;
After job log is full, the oldest job log os overlaid with the newest
job log with NO warning message.
DAYLIGHT SAVING=
ON
Then, the operation stated previously will be repeated at this
OFF*
situation.
In short, this is not displayed, when HDD is not installed.
* For a model WITH HDD;
STOP: After the job log is full, receiving jobs will be stopped with
a message.
WARNING : After the job log is full, the oldest job is overlaid with
the newest job log with a warning message.
Then, the operation stated previously will be repeated with
the warning message.
Figure 1-8-2
Press: To move:
MENU Forward
Menu level
SHIFT & Back
ITEM Forward
Item level
SHIFT & Back
Value level VALUE Forward
SHIFT & VALUE Back
Enter level ENTER Enter
Administrator
YES
CONFIG MENU
password has been
set?
NO
JAM RECOVERY=
OFF* ON ENTER PASSWORD=
xxxxxxx-xxxxxxx
(14
CONFIG MENU
AUTOCONT=ON* OFF
Correct
Verify
password
CONFIG MENU
DENSITY=7*
0 to 15
Incorrect
CONFIG MENU 3 MIN, 30MIN, INVALID PASSWORD
1 HR, 2 HR, 3 HR,
PWRSAV=15 MIN* REENTER=YES*
4 HR
NO YES
ECONOMY MODE=
OFF*
ON
CONFIG MENU
REFINE=ON* OFF
PARALLEL MENU JOB CONTROL MENU
PERSONALITY= JOB SECURING
AUTO* TIMEOUT=2 HR*
PCL, PS PCL, PS 8 HR, 24 HR
PARALLEL MENU PRINT W / USER ID
BIDIRECTION=ON* & PASSWORD=OFF*
5 to 3000 OFF ON
I/O TIMEOUT=
15*
5 to 3000
LANGUAGE MENU
FONTS, DANISH,DUTCH,
RESET MENU LANGUAGE MENU
FORMS, FINNISH,FRENCH,
RESET= MENU* LANG=ENGLISH*
STORED JOB, GERMAN,ITALIAN,
JOB LOG, NORWEGIAN,
ERROR LOG, PORTUGUESE,
JAM LOG SPANISH,SWEDISH
* RESET=FONTS, FORMS
- They are not displayed, when HDD or Flash is
not installed.
* RESET=STORED JOBS
- This is not displayed, when HDD is not installed.
* RESET=JOB LOG, ERROR LOG, JAM LOG,
MENU
- They are always displayed, regardless of the
installation of HDD or Flash.
* After "RESET=xxx" is done,
panel display goes back to "RESET MENU" above,
then when going back to ONLINE, system is
rebooted; if required; then goes to READY .
CHAPTER 1
Arrow in
MENU key
NO
This is not displayed,
when HDD is not installed.
ETHERNET MENU
PERSONALITY=
AUTO*
PCL, PS
I/O TIMEOUT=
15* 5 to 3000
ETHERNET MENU
IP ADDRESS=
ETHERNET MENU
SUBNET MASK=
ETHERNET MENU
GATEWAY
ETHERNET MENU
MAC ADDRESS=
1 - 29