Canon LBP-2000 Service Manual page 217

d . NORMAL ERROR
M e s s a g e
TONER CART No toner cartridge is in-
MISSING s t a l l e d .
LOAD <size> Out of paper.
IN <trays>
LOAD <size> Out of paper.
IN MANUAL
LOAD CLEANING Cleaning the fixing assembly.
PAGE IN MANUAL
PAPER JAM Paper jam.
CHECK INPUT
PAPER JAM Paper jam.
CHECK OUTPUT
PAPER JAM Paper jam.
OPEN FRONT
COVER
CASSETTE1 Cassette 1 is not in the
MISSING printer or is not correctly
positioned.
CASSETTE2 Cassette 2 is not in the
MISSING printer or is not correctly
positioned.
CASSETTE3 Cassette 3 is not in the
MISSING printer or is not correctly
positioned.
PRINTER OPEN The front cover is open.
WRONG PAPER A paper size mismatch has
SIZE o c c u r r e d .
USER ID ERROR The user ID is not registered.
AUTHENTICATION Invalid
ERROR
EXCEEDS STORE Unable to save print job on
LIMIT the printer hard disk
PS OPTION ERROR A optional PS ROM error
o c c u r r e d .
OPTION RAM An optional RAM error
ERROR o c c u r r e d .
OPTION ROM An optional ROM error
ERROR o c c u r r e d .
M e a n i n g
Install the toner cartridge, and then press the
Go key on the printer.
Load paper into printer.
Load paper into Multifeeder Tray.
Load the Multifeeder tray with the Cleaning
Page generated by the printer.
Then, press the Go key to feed the Cleaning
P a g e .
There is a paper jam in the paper feeding area
of the printer.
Remove the jammed paper, and then press the
Go key on the printer.
There is a paper jam near the paper output area
of the printer.
Remove the jammed paper, and then press the
Go key on the printer.
There is a paper jam near the upper cover of the
printer. Remove the jammed paper, and then
press the Online key on the printer.
Install Cassette 1 in the printer. If the paper
cassette is in the printer, remove it, insert it
again and ensure it is securely in position.
Install Cassette 2 in the printer. If the paper
cassette is in the printer, remove it, insert it
again and ensure it is securely in position.
Install Cassette 3 in the printer. If the paper
cassette is in the printer, remove it, insert it
again and ensure it is securely in position.
Close the front cover, and then press the Go key
on the printer.
More than one paper size has been found in the
same tray.
Inspect the trays for mismatched paper and
corr ect.
Enter the user ID.
password Enter the correct password.
There is not enough available free space on the
printer hard disk. Delete unnecessary print jobs
from the printer hard disk, and then, press the
Go key on the printer.
An optional PS ROM has failed the startup
checksum. Replace the optional PS ROM.
An optional RAM has failed the startup diagnos-
tic. Replace the optional RAM.
An optional ROM has failed the startup
checksum. Replace the optional ROM.
APPENDIX
Action
A - 13