CHAPTER 3
B . Drive Assembly
1 . Removing the drive assembly
1) Remove the main motor. (See III-A-1 'Re-
moving the Main Motor.')
2) Remove the manual feed pickup roller.
(See IV-B-2 'Removing the Manual Feed
Pickup Roller.')
3) Disconnect the 4 connectors [1], and free
the harness from the harness guide [2].
[1]
[2]
Figure 3-3-4
4) Remove the E-ring [3], and detach the
registration clutch [4].
Figure 3-3-5
3 - 16
5) Remove the 4 screws [5], and detach the
drive assembly [6].
[3]
[4]
[5]
[6]
[5]
Figure 3-3-6