Canon LBP-2000 Service Manual page 112

CHAPTER 3
1 . Removing the upper cover and the con-
trol panel
1) Remove the expansion board slot cover.
2) Remove the 2 screws [1], and slide out
the upper cover [2] halfway.
[2]
[1]
Figure 3-1-3
3) Remove the control panel harness [3],
and detach the upper cover assembly [4].
[4]
Figure 3-1-4
4) Remove the 2 claws [5], and detach the
control panel [6].
[6]
[5]
Figure 3-1-5
3 - 2
2 . Mounting the upper cover and the con-
1) Mount the upper cover [2] with 2 screws
Caution: After mounting the upper cover,
[3]
trol panel
[1].
[1]
Figure 3-1-6
check to make sure that the con-
trol panel harness [3] is secured
by the harness stop [4].
[4]
[3]
Figure 3-1-7
[2]