Canon LBP-2000 Service Manual page 20

CHAPTER 1
4 . Unpacking and installing the built-in print server (Ether Board EB-65)
Caution: If possible, wear a wrist strap designed to prevent damage by static charges. The static
charges in your body can damage the electric mechanisms when you install the built-in
print server to the Printer.
Take particular care not to touch the parts in electric circuits.
1) Unpack the print server.
2) Take out the print sever from its packaging box.
3) Remove the vinyl bag used to cover the print server.
4) Remove the screw [1], and detach the expansion board slot cover [2].
5) Remove the screw [3], and detach the expansion board slot 2 cover [4].
1 - 14
[2]
[1]
Figure 1-5-6
[4]
[3]
Figure 1-5-7