Canon LBP-2000 Service Manual page 3

This Service Manual provides basic facts and figures needed to service the laser beam printer LBP-
2000 (hereafter, the Printer), performed to ensure initial product quality and performance.
The following options may be used in combination with the Printer:
• Universal Cassette UC-65
• Paper Feeder Unit PF-65
• Hard Disk HD-65
• Ether Board EB-65
This Service Manual also covers these options. For others, see their respective Service Manuals.
This Service Manual consists of the following chapters:
Chapter 1, 'Product Outline,' introduces features and specifications as well as how to install and
use the Printer.
Chapter 2, 'Operation,' explains the principles of operation used in the mechanical/electrical
systems of the Printer according to function as well as timing at which associated
mechanisms
Chapter 3, 'Mechanical System,' shows the mechanical construction of the Printer and how to
disassemble/assemble and adjust its components.
Chapter 4, 'Troubleshooting,' indicates how to correct various faults and make checks/adjust-
ments, and provides standards to follow.
APPENDIX contains a general timing chart, general circuit diagrams, and list of signals.
Changes made to the descriptions because of product improvement or the like will be commu-
nicated in the form of Service Information bulletins as they occur.
All service persons are expected to go through this Service Manual and Service Information
bulletins for a full understanding of the Printer while equipping themselves with skills and know-
ledge used to identify and correct faults in the Printer.
INTRODUCTION
operate.
PREFACE
P - 1