11
Click [Finish].
Copying files is started.
12
When the dialog box for completing installation appears, click
[OK].
13
If the printer and computer are not connected, connect them
with a USB cable, and then turn the power of the printer ON.
The installation of the printer driver is completed.
For Windows 2000
Installing from CD-ROM Setup
1
Make sure that the printer is turned OFF and the computer
and printer are not connected with a USB cable.
IMPORTANT
•
Connect the USB cable at the appropriate point (Step 12 on p. 3-25) during the
installation, and then turn the power ON.
•
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
2
Turn the power of the computer on and start up Windows
2000.
3
Log on as a user who is a member of Administrators.
NOTE
Full Control Permission is required for the installation of the printer driver.
Installing the CAPT Software
3
3-21