Canon LASER SHOT LBP-3600 User Manual page 442

Table of Contents

Advertisement

Cause 2
[Auto Insert Notification] is not selected. (Windows 98/Me only)
Remedy
Display the properties for the CD-ROM drive from [Device Manager] and select
[Auto Insert Notification] in the [Settings] sheet.
The error message "File not found on CD-ROM." appears when CD-ROM Setup starts up.
Cause
The program is loaded from the hard disk.
Remedy
Browse [CNAB1MNU.EXE] using the browse function of your computer, delete
the CNAB1MNU.EXE file from the hard disk, and then start up CD-ROM Setup
from the supplied CD-ROM "LBP3600 User Software".
The message, "Toner Cover Open" appears in the Printer Status Window.
Cause 1
The toner cover is open.
Remedy
Close the toner cover. If you cannot close the toner cover, check if the toner
cartridge is set properly. If you close the toner cover forcefully, this may cause
damage to the printer.
Cause 2
The top rear cover is not set properly.
Remedy
Check if the top rear cover is set properly. If the top rear cover is not set
properly, take the cover out once, and then set it again, properly. (See "Moving
the Printer," on p. 5-37)
The message, "Duplex Unit is not attached correctly" appears in the Printer Status Window.
Cause 1
The duplex unit is not installed properly.
Remedy
Turn the power of the printer OFF, then install the duplex unit again, properly.
Cause 2
The top rear cover is not set properly.
Remedy
Check if the top rear cover is set properly. If the top rear cover is not set
properly, take the cover out once, and then set it again, properly. (See "Moving
the Printer," on p. 5-37)
Miscellaneous Problems
7
7-59

Advertisement

Table of Contents
loading

Table of Contents