Miscellaneous Problems - Canon LASER SHOT LBP-3600 User Manual

Miscellaneous Problems

NOTE
For details on problems on installing the optional network board, see "Chapter 4
Troubleshooting" in Network Guide.
LBP3600 does not function properly.
Cause 1
Remedy
Cause 2
Remedy
The printer stops printing temporarily during printing.
7
Cause 1
Remedy
Cause 2
Remedy
CD-ROM Setup does not appear automatically.
Cause 1
Remedy
7-58

Miscellaneous Problems

LBP3600 is not specified as the default printer.
Specify it as the default printer.
The CAPT software may not be installed properly.
In order to check if the CAPT software is installed properly, print from the
application. If you cannot print properly, uninstall the CAPT software and install
it again. (See "Uninstalling the CAPT Software," on p. 3-77, "Installing the
CAPT Software," on p. 3-4)
The temperature of the fixing unit exceeded a certain degree limit by a
continuous job (especially by printing paper of a narrow width).
Wait for a while. The printer automatically cools down the fixing unit. The printer
resumes the paused job after cooling down the fixing unit.
In case paper of a wider width is printed after paper of a narrower width is
printed, the printer cools down the fixing unit to keep the print quality high.
Wait for a while. The printer automatically cools down the fixing unit. After
cooling down the fixing unit, the printer stops running and becomes ready to
print. In case during printing, the printer resumes the job after cooling down the
fixing unit.
[Always Display when CD is Inserted] in CD-ROM Setup is not selected.
Right-click the CD-ROM drive icon in [My Computer] and select [Open] to
display CD-ROM Setup manually. Select [Always Display when CD is Inserted].