7
Click [Next]. Installation of the printer driver begins.
8
Click [Finish].
If you want to change the name of the printer, enter the name you wish to use
before you click [Finish].
9
When the installation is complete, the following dialog box appears.
Click [OK] to close the dialog box.
Click [Finish] on the [Add New Hardware Wizard] dialog box.
When the installation is complete, see on p. 13.
If you cannot install the software, see on p. 14.
For Windows 2000
IMPORTANT
Before you install the software, make sure that the printer is connected to
your computer using a USB cable and the printer is turned on.
1
Turn on your computer, and then start Windows 2000.
Plug & Play is being carried out and the USB driver, [USB Printing Support] is
automatically detected and installed.
2
Log on as the Administrator.
NOTE
Full access rights are necessary for the installation of the CAPT.
10