Loading Paper In A Paper Cassette - Canon LASER SHOT LBP-3600 User Manual

Loading Paper in a Paper Cassette

Different sizes of paper can be loaded in Cassette 1 supplied with the printer and in
Cassette 2, 3, and 4 that are available when the optional paper feeders are
installed. Then, you can switch among these paper sources automatically.
Since the paper loading procedures for Cassette 1 and for the optional Cassette 2
to 4 differ, load paper properly using the following procedure.
IMPORTANT
2
•
Follow the instructions below to prevent your printer from paper jams.
- Do not load media other than plain paper (64 - 80 g/m
- Do not load paper with jagged edges, creased, or extremely curled paper.
- Refill the cassette when paper runs out. If the cassette is refilled when paper still
- Up to approximately 250 sheets of plain paper (64 g/m
•
Do not touch the black rubber pad in the paper cassette. If you touch it, this may result in
misfeeds.
- Cassette 1
2-18 Printing from a Paper Cassette
such as transparencies, labels, and envelopes. For more details on the paper that can
be loaded, see "Paper Requirements," on p. 2-2.
remains in the cassette, it may result in misfeeds.
(90 g/m 2 ) can be loaded in the paper cassette. Be sure that the paper stack does not
exceed the load limit marks on the paper guides. If the paper stack exceeds the load
limit marks, this may result in misfeeds.
Rubber pad
2 ) and heavy paper (81 - 90 g/m
2 ) or 150 sheets of heavy paper
2 ),