Canon LASER SHOT LBP-3600 User Manual page 381

6
7
8
9
10
11
6
12
6-50 Network Board
Secure the top and bottom portions of the network board with
the 2 screws supplied with the network board.
Connect the power cord.
Plug the power plug into the AC power outlet.
Press " " of the power switch to turn the printer ON, wait until
the Ready indicator illuminates, and then press "
power switch to turn the printer OFF.
Unplug the power plug from the AC power outlet.
Remove the power cord.
Remove the network board, then reset the DIP switch 1 to
OFF.
Set the DIP switches with the tip of a ball-point pen etc.
E R R
C 1
N B -
IMPORTANT
When setting the DIP switches, be careful not to damage the main board with the
tip of a ball-point pen etc. Do not use a sharp object such as a mechanical pencil.
DIP switches 1
OFF
1 0 0
L N K
" of the
1 2 3 4
OFF