Removing The Paper Feeders - Canon LASER SHOT LBP-3600 User Manual

IMPORTANT
Do not put hands, press hard, or place objects on the cassette protective cover. It
may damage to the cassette protective cover.
NOTE
The cassette protective cover can be attached to the back of any of the paper
feeders. Attach it to the appropriate position.
6
Set the paper cassettes in the main unit and paper feeders.
NOTE
If the optional duplex unit was previously installed, reinstall it on the printer. For
details on the procedure for installing the duplex unit, see "Installing the Duplex
Unit," on p. 6-32.
7
Connect all interface cables and the power cord to the printer.
8
Plug the power plug into the AC power outlet.
NOTE
After installing the paper feeders, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking the [Get
Device Status] button in the [Configuration]/[Device Settings] sheet.

Removing the Paper Feeders

Remove the paper feeders using the following procedure.
WARNING
Be sure that the power of the printer is turned OFF, the power cord is
unplugged, and all interface cables and power cord are disconnected from the
printer before removing the paper feeders. Otherwise, the power cord or
interface cables may be damaged, resulting in a fire or electrical shock.
CAUTION
•
Do not carry the printer with the paper cassette attached. If you do so, the paper
cassette may drop resulting in personal injuries.
Paper Feeder 6-25
6