Connect The Lan Cable - Canon LASER SHOT LBP-3600 User Manual

5
Secure the top and bottom portions of the network board with
the 2 screws supplied with the network board.
6

Connect the LAN cable.

Connect a LAN cable that is compatible with the LAN connector of the network
board according to the network.
NOTE
•
This network board does not come with a LAN cable. A Category 5 twisted pair
cable is required for installing the network board and connecting the printer to a
network. Have a cable or hub available as needed.
•
If the optional duplex unit was previously installed, reinstall it on the printer. For
details on the procedure for installing the duplex unit, see "Installing the Duplex
Unit," on p. 6-32.
Network Board 6-43
6