Table of Contents
Advertisement
2
4
3
Specifying the Finishing Method
You can specify a variety of options for print processing.
1
4-60
Using the Printing Functions
Specify the value in the spin box.
Specify the following items as needed:
[Image
When [Gutter] is specified, the position of the page
Processing]:
image is adjusted to make room for the gutter. At this
point, you can select whether to reduce the size of the
image to fit the remaining space. When [Reduce and
Arrange] is selected, the size of the image is
automatically reduced to adjust the page image
position so that the entire image remains in the print
area. When [Stagger Image with Size as-is] is
selected, the page image position is adjusted without
changing its size. Any part of the print image that lies
outside the print area will be missing in the printout.
Confirm the settings, then click [OK].
The [Finishing] sheet reappears.
Display the [Finishing] sheet, then click [Finishing Details].
Advertisement
Table of Contents
Troubleshooting
