Installing The Network Board - Canon LASER SHOT LBP-3600 User Manual

Installing the Network Board

Install the network board on the expansion slot of the printer using the following
procedure. A Phillips screwdriver is required for installing the network board. Have
one that matches the size of the screws available.
1
Press "
unplug the power plug from the AC power outlet
2
Remove all interface cables and the power cord.
If there is not enough space to install the network board, move the printer so that
you can work easier.
NOTE
If the optional duplex unit is installed, remove it from the printer. For details on
removing the duplex unit, see "Removing the Duplex Unit," on p. 6-34.
" of the power switch to turn the printer OFF
.
b b b b
b
O N
F
O F
a
Network Board
, then
a a a a
6
6-41