Troubleshooting Map - Canon LASER SHOT LBP-3600 User Manual

Troubleshooting Map

If any problem occurs while you are using the printer, follow the flow chart shown
below to check the problem.
The printer driver
fails to print.
No
Printing is
impossible.
An error message
appears on the
Printer Status Window.
7
Print quality
deteriorates.
Paper Problems
(See "Paper Problems," on p. 7-47)
7-2

Troubleshooting Map

Yes
Follow the messages displayed
on the Printer Status Window to
remedy an error.
(See "Printer Status Window," on p.
4-79)
Toner density is set to light.
(See "Specifying the Print Quality," on
p. 4-65)
Toner runs low.
(See "Replacing the Toner Cartridge," on
p. 5-2)
The printer is installed in an
adverse environment.
(See the Getting Started Guide)
Other Problems
(See "Paper Quality Problems," on p.
7-41)
The printer driver is not installed
properly.
(See "Installation Problems," on p. 7-50)
The Alarm indicator is on or blinking.
(See "Alarm Indicator," on p. 7-3)
The power cord is not connected.
The power switch is turned OFF.
(See "Turning the Printer ON/OFF," on p. 1-10)
The printer is not connected to your
computer.
(See "Connecting to a Computer," on p.1-13)
The printer driver is not installed
properly.
(See "Installation Problems," on p. 7-50)