Canon LASER SHOT LBP-3600 User Manual page 366

1
Press " " of the power switch to turn the printer OFF, then
unplug the power plug from the AC power outlet.
2
Remove all interface cables and the power cord.
3
Open the duplex unit rear cover.
4
Push up the lock release levers on each side of the duplex
unit, then remove the duplex unit.
5
Close the duplex unit rear cover.
6
Set the top rear cover.
Fit up the upper left portion of the top rear cover a, then insert the projection on
the upper right into the hole b.
a
b
Duplex Unit
6
6-35