Handling the Printer
This section describes how to handle your printer.
Stress Free Setup Service
Brady's Stress Free Service helps you set up your new printer and software. To schedule a free
phone setup assistance appointment, call 1-800-643-8766 and select menu option 4.
Unpack and Inspect the Printer
When you receive the printer, immediately unpack it and inspect for shipping damage.
• Save all packing materials.
• Check all exterior surfaces for damage.
• Raise the media door, and inspect the media compartment for damage to components.
If you discover shipping damage upon inspection:
• Immediately notify the shipping company and file a damage report.
• Keep all packaging material for shipping company inspection.
• Notify your authorized Brady reseller
Important •
shipment of the equipment and will not repair this damage under warranty.
Register Your Printer
Go to www.bradyid.com to register your BBP81. As a registered user, you will receive
notification of upgrades, special offers, and new product announcements.
Store the Printer
If you are not placing the printer into immediate operation, repackage it using the original
packing materials. You may store the printer under the conditions shown in
Temperature
–40°F to 140°F (–40° to 60°C)
5/13/08
Brady Worldwide Inc. is not responsible for any damage incurred during the
Table 3 • Storage Temperature and Humidity
BBP81 User Manual
Relative Humidity
5% to 85% non-condensing
Printer Setup
17
Handling the Printer
Table
3.
Y882746