Table of Contents
Advertisement
74
Configuration
Control Panel Parameters
Parameter
Y882746
Table 12 • Printer Parameters (Page 21 of 22)
Action/Explanation
Select Idle Display
This parameter selects the LCD options for the real-time clock.
Note •
If the default value is not selected, pressing
MINUS (-)
briefly displays the firmware version of the printer.
Default Value: FIRMWARE (FW) VERSION
Selections: MM/DD/YY (24HR), MM/DD/YY (12HR), DD/MM/YY
(24HR), DD/MM/YY (12HR), FW VERSION
To change the value shown:
1. Press
SELECT
to select the parameter.
2. Press
PLUS (+)
3. Press
to accept any changes and deselect the parameter.
SELECT
Set Real-Time Clock (RTC) Date
This parameter allows you to set the date following the convention selected
IDLE DISPLAY
in
To change the value shown:
1. Press
to select the parameter.
SELECT
2. Press
MINUS (-)
3. Press
PLUS (+)
4. Press
SELECT
to accept any changes and deselect the parameter.
Set RTC Time
This parameter allows you to set the time following the convention selected
IDLE DISPLAY
in
To change the value shown:
1. Press
SELECT
to select the parameter.
2. Press the left oval
3. Press the right oval
4. Press
SELECT
to accept any changes and deselect the parameter.
Specify Password Level
This parameter allows you to select whether certain factory-selected menu
items or all menu items are password protected.
Default Value: SELECTED ITEMS
Selections: SELECTED ITEMS, ALL ITEMS
1. Press
to select the parameter.
SELECT
2. Press
PLUS (+)
3. Press
SELECT
to accept any changes and deselect the parameter.
BBP81 User Manual
or
to scroll through the options.
MINUS (-)
.
to move to the next digit position.
to change the value of the digit.
.
MINUS (-)
to move to the next digit position.
PLUS (+)
to change the value of the digit.
or
to toggle between the options.
MINUS (-)
PLUS (+)
or
5/13/08
Hide quick links:
Advertisement
Table of Contents
