Brady BBP81 User Manual page 73

Parameter
ZPL and XML only
5/13/08
Table 12 • Printer Parameters (Page 14 of 22)
Action/Explanation
Set Parallel Communications
Select the communications port that matches the one being used by the host
computer.
Default Value: BIDIRECTIONAL
Selections: BIDIRECTIONAL, UNIDIRECTIONAL
To change the value shown:
1. Press SELECT to select the parameter.
2. Press PLUS (+)
3. Press SELECT to accept any changes and deselect the parameter.
Set Serial Communications
Select the communications port that matches the one being used by the host
computer. This setting applies only when the serial port is used.
Note • Select RS232 if you are using an external adapter to enable
RS422/485 operation.
Default Value: RS232
Selections: RS232, RS485 MULTIDROP
To change the value shown:
1. Press SELECT to select the parameter.
2. Press PLUS (+)
3. Press to accept any changes and deselect the parameter.
SELECT
Set Baud
This setting applies only when the serial port is used. The baud setting of
the printer must match the baud setting of the host computer for accurate
communications to take place. Select the value that matches the one being
used by the host computer.
Default Value: 9600
Selections (ZPL, XML): 300, 600, 1200, 2400, 4800, 9600, 14400, 19200,
28800, 38400, 57600, 115200
Selections (EPL): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
To change the value shown:
1. Press to select the parameter.
SELECT
2. Press
PLUS (+)
3. Press to accept any changes and deselect the parameter.
SELECT
BBP81 User Manual
or MINUS (-) to scroll through the options.
or MINUS (-) to scroll through the options.
or to scroll through the options.
MINUS (-)
Configuration
Control Panel Parameters
Y882746
67