Print Modes; Print Mode Descriptions And Printer Requirements - Brady BBP81 User Manual

32 Operations

Print Modes

Print Modes

The printer can use different print modes and options for label removal
mode that matches the media being used. For more information on the types of media, see
Types of Media on page

Print Mode Descriptions and Printer Requirements

Print Mode When to Use/Printer Options Required
Tear-Off Use for most applications. This mode can
(default setting) be used with any printer options and most
media types.
Peel-Off Use only if the printer has the Peel-Off,
Liner Take-Up, or Rewind option.
Cutter Use if the printer has a cutter option when
you want the labels to be cut apart.
Delayed Cut Use if the printer has a cutter option when
you want the printer to cut the labels apart
at a signal.
Rewind Use if the printer has the Rewind option and
you want the labels to rewind on a core.
Linerless Peel Reserved for future options.
Linerless Reserved for future options.
Rewind
Y882746
26. To select a print mode, see
Table 8 • Print Modes
Printer Actions
The printer prints label formats as it
receives them. The printer operator can tear
off the printed labels any time after they
print.
The printer peels the label from the liner
during printing and then pauses until the
label is removed.
In Peel-Off mode, the liner exits the front of
the printer. In Peel-Off mode with Liner
Take-Up, the liner winds onto the liner
take-up spindle or the rewind spindle.
The printer prints a label and then cuts it
free.
The printer prints a label, pauses, and cuts
the label when it receives the ~JK (delayed
cut) ZPL command.
The printer prints without pausing between
labels. The media or liner is wound onto a
core after printing.
Reserved for future options.
Reserved for future options.
BBP81 User Manual
(Table 8). Use a print
Select Print Mode on page 61.
5/13/08