Pause Self Test - Brady BBP81 User Manual

PAUSE Self Test

This self test can be used to provide the test labels required when making adjustments to the
printer's mechanical assemblies or to determine if any printhead elements are not working.
Figure 18
To perform a PAUSE self test, complete these steps:
1. Turn off (
2. Press and hold
panel light turns off.
•
•
•
•
•
•
5/13/08
shows a sample printout.
O ) the printer.
PAUSE while turning on (
The initial self test prints 15 labels at the printer's slowest speed, and then
automatically pauses the printer. Each time
print. Figure 18 shows a sample of the labels.
Figure 18 • PAUSE Test Label
While the printer is paused, pressing
pressed, 15 labels print at 6 in. (152 mm) per second.
While the printer is paused, pressing
Each time PAUSE is pressed, 50 labels print at the printer's slowest speed
While the printer is paused, pressing
Each time is pressed, 50 labels print at 6 in. (152 mm) per second.
PAUSE
While the printer is paused, pressing
Each time PAUSE is pressed, 15 labels print at the printer's maximum speed.
To exit this self test at any time, press and hold
BBP81 User Manual
I ) the printer. Hold PAUSE
PAUSE is pressed, an additional 15 labels
alters the self test. Each time
CANCEL
CANCEL again alters the self test a second time.
CANCEL again alters the self test a third time.
again alters the self test a fourth time.
CANCEL
CANCEL .
Troubleshooting 101
Printer Diagnostics
until the first control
is
PAUSE
Y882746