Installation And Preparation; Unpack And Set Up The Printer; Unpack - Brady BradyPrinter A5500 User Manual

4 Installation and Preparation

This section provides information on installing and preparing the BradyPrinter A5500 printer for initial
use. Follow these steps before creating and printing labels:

Unpack and Set Up the Printer

Unpack

Note: Make sure the BradyPrinter A5500 printer box remains in the upright position at all times.
Do not lay the box on its side.
1. The BradyPrinter A5500 printer comes in a cardboard box banded to a pallet. Cut the band.
2. Lift the top cover off the base.
3. Lift the BradyPrinter A5500 printer out of the protective foam surrounds and place the unit on a
flat, level surface.
Note: Save all packaging materials! These will be needed if you must ship the printer.
4. Remove the following additional items from the box:
•
•
•
•
•
The following items come pre-installed in the BradyPrinter A5500 printer:
•
•
BradyPrinter A5500 User Manual
The BradyPrinter A5500 printer weighs 75 lbs.
WARNING!
Get assistance to lift!
USB drive containing the following:
• Windows (printer) Driver
• BradyPrinter A5500 User's Manual
7/16" wrench
Power cord
USB cable
Booklet with the code to download a single license for the Brady Workstation Product and Wire
Identification Suite software
Label Material
Ribbon
9