Brady BBP81 User Manual page 96

90 Troubleshooting
LCD Error Messages
LCD Display/
Printer Condition
DEFRAGMENTING
The printer stops.
OUT OF MEMORY
(function)
Y882746
Table 15 • LCD Error Messages (Continued)
Possible Cause
The printer is defragmenting
memory.
There is not enough memory to
perform the function specified on
the second line of the error
message.
BBP81 User Manual
Recommended Solution
Caution • Do NOT turn off the printer
power during defragmenting. Doing so
can damage the printer.
Allow the printer to finish
defragmenting. If you get this error
message frequently, check your label
formats. Formats that write to and erase
memory frequently may cause the
printer to defragment often. Using
properly coded label formats usually
minimizes the need for defragmenting.
If this error message does not go away,
contact Technical Service. The printer
requires service.
Free up some of the printer's memory
by adjusting the label format or printer
parameters. One way to free up
memory is to adjust the print width to
the actual width of the label instead of
leaving the print width set to the
default. See Set Print Width
on page 59.
Ensure that the data is not directed to a
device that is not installed or is
unavailable.
5/13/08