Feed And Pause Self Test - Brady BBP81 User Manual

FEED and PAUSE Self Test

Performing this self test temporarily resets the printer configuration to the factory default
values. These values are active only until power is turned off unless you save them
permanently in memory. If the factory default values are permanently saved, a media
calibration procedure must be performed.
To perform a FEED and PAUSE self test, complete these steps:
1. Turn off (
2. Press and hold
3. Hold
The printer configuration is temporarily reset to the factory default values. No labels print
at the end of this test.
5/13/08
O ) the printer.
FEED and PAUSE
FEED and PAUSE until the first control panel light turns off.
BBP81 User Manual
while turning on ( I ) the printer.
Troubleshooting 105
Printer Diagnostics
Y882746