AT&T MERLIN LEGEND Key System Planning page 218

I n d e x
for tie trunk, 3-35
inside (system internal), 4-25
Dial-in tie trunk
redirecting outside calls on, 4-26
Remote Access number for, 3-10
Dial-It Nova. See MultiQuest
Dialed Number Identification Service, 3-14
and tie-trunk signaling type, 3-35
Digital data stations, 1-4
Digital services on DS1 facility, 3-14, 3-15
Digital Signal 1 facility, 3-13
Digital station jacks, 2-12
Digital/lSDN (MLX) telephones
line assignment to, 3-42
microphone operation on, 4-3
station jacks for, 2-15
types of, 1-4
Direct-line console
Automatic Hold, 4-5
Extension Status button on, 4-23
line assignment to, 3-42
maximum numbers of, 2-13
Operator Hold Timer, 4-5
Remote Access lines on, 3-9
station jacks for, 2-13
Direct Station Selector
Call Park codes on, 4-7
definition of, 1-3
One-Touch transfer for, 4-21
one-touch use of Group Calling, 4-14
one-touch use of Group Paging, 4-9
Page buttons on, 4-6
Direction of tie trunk, 3-35
Directory, labeling
Extension (station), 4-31
System, 4-32
Disallowed Lists, 4-27
Call Restrictions and, 4-2
class of restriction and, 3-11
Disconnect interval. See Hold
Disconnect reliability, Ioop-start line, 3-7
Disconnect time for tie trunk, 3-35
DLC. See direct-line console
DLC Automatic Hold, 4-5
DNIS. See Dialed Number Identification Service
DOC notification, viii
DS1. See Digital Signal 1 facility
DSS. See Direct Station Selector
E
E&M signal for tie trunk, 3-34
Emergency Allowed List, Night Service, 4-28
Employee Communication Survey
form, 1-8
sample analysis of, 1-10
Environmental requirements for control unit, 1-5 – 1-6
ESF. See extended superframe
Exclusion List, Night Service, 4-29
Expansion carrier
dimensions, 1-6
sample diagram of, 2-7
Extended superframe format, 3-17
Extension Directory labeling, 4-31
Extension numbers
relationship to logical IDs, 2-11
renumbering, 2-18
Extension Status, 4-23
External alert
for Calls-in-Queue Alarm, 4-17
line jack for Maintenance Alarm, 3-6
types of, 1-4
F
Facility interface codes, viii, 3-34
Factory setting. Specific line or feature entry
Fax, 1-4
line assignment to, 3-41
Message Waiting Receiver and Threshold, 4-4
Features
group assigned, 4-8
system, 4-22
telephone, 4-1
Fixed dial code, 2-18
Floor plan
creating, 1-11
sample, 1-12
updating, 2-24
Forced Account Code Entry, 4-2
Foreign exchange CSU setting, 3-21
Foreign exchange lines, connecting, 3-4
Forms, 5-11
checklist and index, xiv
Frame format for DS1 facility, 3-16
FX. See foreign exchange
G
General Purpose Adapter, 1-3
Generic VMI setting for calling group, 4-19
GPA. See General Purpose Adapter
Ground-start/loop-start line jacks, 3-2
Group assigned features
call pickup groups, 4-8
Coverage, 4-10
Group Calling, 4-14
IN-3