I n d e x
Paging, loudspeaker, 1-4
line jack for, 3-6
Password
Night Service, 4-31
Remote Access, 3-10
PBX Mode, Hybrid/, 2-9
PC. See personal computer
Personal computer with MERLIN LEGEND System
Programming and Maintenance, 2-8
Personal Line
button, 3-41
Personal line and Remote Call Forward, 4-3
PFT. See power failure transfer
Pickup groups, call, 4-8
Placement of modules in control unit, 2-5
Planner for T1/lSDN, 3-28
Posted Message labeling, 4-31
Power failure transfer jacks, 2-3
and logical IDs, 2-6
Power requirements, 1-5
Power supply module, 1-3
definition, 2-1
placement in control unit, 2-5
PRI. See Primary Rate Interface
Primaary Individual Coverage, 4-10
Primary operator position station jack, 2-13
Primary Rate Interface facility, 3-22
designating a DS1 facility as, 3-14
digital services on, 3-14, 3-15
Prime line
assigning, 3-44
definition of, 2-9
Principal user of personal line and Remote Call Forward, 4-3
Processor module
placement in control unit, 2-5
types of, 2-1
Programming equipment, 2-8
R
RBS. See robbed-bit signaling
Receivers for Group Coverage, 4-12
Redirect calls to unassigned extension numbers, 4-26
Reminder Service cancel, 4-25
Remote Access, 3-9
Remote Call Forward, 4-3
specifying disconnect reliability for, 3-7
Remote setting for tie-trunk dial tone, 3-36
Renumbering, system, 2-18 – 2-24
Restrictions, Call, 4-2
Return Interval, Transfer, 4-21
Return Time
Call Park, 4-22
Camp-On, 4-22
Ringback, 4-22
IN-6
Robbed-bit signaling, 3-21
Rotary dial
lines, 3-8
mode for tie trunk, 3-35
S
SA. See System Access
SAA. See Supplemental Alert Adapter
Safety instructions, v
SASS. See Shared Access for Switched Service
SDN. See Software Defined Network
Secondary Individual Coverage, 4-10
Security of your system, xi
Seizure type for tie trunk, 3-35
Set Up Space numbering plan, 2-18, 2-23
Shared Access for Switched Service, 3-15
Shared Remote Access, 3-10
Short Hold Disconnect interval, 3-8
and disconnect reliability, 3-7
SID. See Station Number Identification service
Signaling
mode for DS1 facility, 3-21
type for tie trunk, 3-35
Simultaneous Voice and Data, 2-15
Single-line telephones
explanation of, 1-3
line assignment to, 3-44
station jacks for, 2-17
Small processor module, 2-1
SMDR, See Station Message Detail Recording
Software Defined Network, 3-15
Special access CSU setting, 3-22
SPM. See MERLIN LEGEND System Programming and
Maintenance
Station and line modules
capacities, 2-4
definition, 1-3
placement in control unit, 2-5
Station jacks
analog multiline telephone, 2-16
applications, 2-17
digital/lSDN (MLX) telephone, 2-15
logical IDS for, 2-6
operator position, 2-13
pairs of, 2-14
primary operator position, 2-13
single-line telephone, 2-17
system programming console, 2-8
tip/ring equipment, 2-17
types of, 2-12
Station labeling, 4-30
Station Message Detail Recording, 4-24
set system date and time for, 2-10
Station Number Identification service, 3-15
Need help?
Do you have a question about the MERLIN LEGEND and is the answer not in the manual?