Assembling The Voice Terminals - AT&T MERLIN 410 Service Manual

Assembling the Voice Terminals

1. Install the stand or wall mount for a voice terminal, following the instructions packed
with the stand or mount.
2.
Get two cord labels. Write the intercom number for the voice terminal on them.
Attach one label around a D8W Modular Terminal Cord near one end, following the
3.
instructions packed with the labels. Attach the other label around the other end of the
same cord.
4. Turn the voice terminal upside down. and plug one end of the D8W Modular Terminal
Cord into the jack labeled "LINE". See Figure 17.
5. Plug one end of the coiled handset cord into the proper jack on the bottom of the voice
terminal. This jack has a drawing of a handset beside it. Plug the other end into the
handset, and place the handset on the voice terminal base.
Do not plug the handset into the jack labeled "OTHER".
Warning:
6. If this terminal includes an accessory headset adapter or a hands-free unit, plug the
D8AC Cord (packed with the accessory item) into the "OTHER" jack on the bottom of
the voice terminal. (Instructions for installing these accessories are packed with the
items.)
TO 'LINE'
JACK
'LINE'
JACK
'OTHER'
JACK
Figure 17
Installation (cont'd)
CORD SLOT
D8W
27