AT&T MERLIN 410 Service Manual page 20

625–TYPE CONNECTING BLOCK
(NOTICE DOES NOT
APPLY TO "MERLIN"
INSTALLATION)
625–TYPE CONNECTING BLOCK
If there is a separate network interface for each local telephone exchange service
2.
company line or if your system has only one line coming in, go to the next step. Oth-
erwise, plug the (267C) two-line adapter into the jack on the network interface as
shown in Figure 5.
625–TYPE CONNECTING BLOCK
(FLUSH MOUNTED)
Figure 4
Figure 5
630–TYPE CONNECTING BLOCK
(FLUSH MOUNTED)
16