B. Checking the Shipment
Open all packages and make sure you have all the items you ordered. Use your copy of
the order form to check your shipment.
For help in identifying items, refer to Figure 2 (Illustrated Parts List). If there are any
discrepancies, call your sales representative or the HELP number provided in the "Introduc-
tion" section.
Do not discard Customer Information Brochures (CIBS) included with items in
Note 1:
your shipment. These instructions may be referred to in this Manual. To avoid
losing the instructions, keep them with the items until you need to use them.
Do not discard the cartons and packaging material. You may have overlooked a
Note 2:
small item, or you may need the cartons and packing to return damaged or defec-
tive items.
Save the extra serial number tags loosely packed with the control unit, voice ter-
Note 3:
minals, and cartridges.
C. Getting the Tools You Need
Get the following tools:
Hammer
1.
2.
Screwdriver
3.
Drill and appropriate bits, 5/8-inch and smaller (if control unit, voice terminals, or the
extra-alert switch are to be mounted on a wall, or if you must route wiring through
walls).
4.
Stapler and staples appropriate for attaching wiring to baseboard.
Preinstallation (cont'd)
5
Need help?
Do you have a question about the MERLIN 410 and is the answer not in the manual?
Questions and answers